system benefits

Savings

Mule-Hide metal products reduce installation expenses and increase productivity. Our wide assortment of standard
and custom-fabricated products are quick and easy to install, helping to reduce labor costs by eliminating on-site
metal fabrication.

Quality

Completed products are carefully inspected, a protective film is applied, and then they are shipped to the
job site, ready for installation.

Endless Options

We stock all 29 24-gauge Kynar® metal finishes. In addition to these standard metals,
we also have specialized metals including:

  • .040 and .050 Aluminum Kynar Finish
  • .040 and .050 Aluminum Mill Finish

  • 16 oz. Copper

  • 24-gauge Stainless Steel
  • 24-gauge Bonderized (paintable) steel

WIND CALCULATOR

Determine the roof edge design pressure required to meet the ANSI/SPRI ES-1 Wind Design Standard and the 2003 International Building Code Section 1504.5 "Edge Securement for Low Slope Roof" with SPRI’s Wind Calculator. 

NEW! TPO coated edge metal

TPO coated EDGE METAL with TPO skirt

  • Available with a six-inch factory-fabricated TPO skirt
  • Available in Drip Edge, T-Edge, T-Edge Plus and Gravel Stop
  • Easier and faster installation by heat-welding skirt to perimeter membrane
  • Reduce hand-welding time
  • Available in white

fascia

1-3/4 and 4” Fascia Cover

  •  End-notched for trouble-free piece-to-piece docking
  • Use with 1-3/4" and 4" vinyl fascia bar
  • Pre-mitered inside and outside corners are ready to assemble
  • 1-3/4" Fascia Cover FM Approved 1-990
  • 4" Fascia Cover FM Approved 1-825
  • Meets ANSI/SPRI ES-1 RE-2 testing requirements
  • EPDM, TPO and PVC available in 29 Kynar® colors
 

4” FLEX FASCIA Cover

  • Pre-notched grooves allow fascia cover to easily snap over radial surfaces
  • Can be installed on both inside and outside radius edges
  • Use with 4" vinyl fascia bar
  • Available in 10' lengths
  • EPDM, TPO and PVC available in 29 Kynar® colors

2-Piece Snap-On Compression

  • Secures membrane while providing an aesthetically-pleasing finish
  • Pre-mitered inside and outside corners are ready to assemble
  • Available in 10' lengths; 3" through 8" widths
  • 4" 2-Piece Snap-On Compression FM Approved 1-360
  • 6" 2-Piece Snap-On Compression FM Approved 1-135
  • Meets ANSI/SPRI ES-1 RE-2 testing requirements
  • EPDM, TPO and PVC available in 29 Kynar® colors

2-Piece Snap-On Compression LG

  • Installs the same as a 1-Piece Snap-On with pre-punched holes in the base
  • Pre-mitered inside and outside corners are ready to assemble
  • Available in 10’ lengths; 9” through 13” widths
  • Meets ANSI/SPRI ES-1 RE-2 testing requirements
  • Call for colors available on EPDM, TPO and PVC
 

Drip Edge

Drip Edge

  • Provides visually appealing termination
  • Profiles can be custom fabricated to meet most specifications
  • TPO available in white coated metal with or without 6" attached skirt
  • PVC available in white coated metal with 6" attached skirt
  • Available in 29 Kynar® colors for EPDM systems
  • Available in 10' lengths; 2" through 6" widths
  • Meets ANSI/SPRI ES-1 RE-2 testing requirements
  
 


Gravel Stop

  • Provides a professional appearance while securing roofing membrane
  • Available in 10' lengths, custom sizes 3" through 8" Pre-mitered inside and outside corners are ready to assemble
  • TPO available in white coated metal with or without 6" attached skirt
  • PVC available in white coated metal with 6" attached skirt
  • Available in 29 Kynar® colors for EPDM systems
  


T-Edge

  • Combines the functionality of the drip edge and the professional finish of fascia coves
  • Consists of splice plate, Kynar® finish T-Edge metal base and hook strip available in 29 colors
  • TPO and PVC hook strips come with an attached 6" skirt that connects the extended eave of the T-Edge 
  • TPO available in white coated metal with or without skirt
  • PVC available in white coated metal and skirt
  • Available in 10' lengths; 2" through 8" widths
  • Meets ANSI/SPRI ES-1 RE-2 testing requirements



T-Edge Plus

  • Combines the functionality of the drip edge and the professional finish of fascia coves
  • Double-folded drip edge neatly conceals the hook strip
  • Consists of splice plate, Kynar® finish T-Edge metal base and hook strip available in 29 colors
  • TPO and PVC coated hook strip comes with an attached 6" skirt that connects the extended eave of the T-Edge
  • TPO available in white coated metal with or without skirt
  • PVC available in white coated metal with skirt
  • Available in 10' lengths; 2" through 8" widths
  • Meets ANSI/SPRI ES-1 RE-2 testing requirements


Arched Drip Edge

  • Provides a smooth finish that is an aesthetically pleasing alternative to traditional piecing
  • Available in 5' through 10' lengths; 3" through 8" widths depending on building’s arch specifications
  • PVC coated roof flange enables welding a separate skirt to both the flange and the installed roof membrane to provide watertight seal
  • Available in 29 Kynar® colors for EPDM systems
  • PVC available in white, tan or gray coated metal

Copings

Snap Coping

  • Provides complete finish on parapet walls
  • 6" concealed plate provides coverage for expansion and contraction
  • No exposed fasteners
  • Pre-fabricated inside and outside corners are ready to assemble
  • Available in 10' lengths; widths are customized to specifications 
(4" x 8" x 3" minimum)
  • Max. face of 6" and 16" meets ANSI/SPRI ES-1 RE-3 testing requirements
  • Available in 29 Kynar® colors
 

Canted Coping

  • Ideal for parapet walls requiring water to drain towards the roof side
  • Gives the same appearance of the snap coping
  • Pre-fabricated inside and outside corners are ready to assemble
  • 6" concealed plate provides coverage for expansion and contraction
  • Available in 10' lengths; widths are customized for specifications
  • Max. face of 6" and 16" meets ANSI/SPRI ES-1 RE-3 testing requirements
  • Available in 29 Kynar® colors

Flat Coping

  • Provides complete finish to parapet walls
  • Installed using a continuous face cleat
  • Pre-fabricated inside and outside corners are ready to assemble
  • 6" concealed plate provides coverage for expansion and contraction
  • Available in 10' lengths; widths are customized for specifications
  • Max. face of 6" and 16" meets ANSI/SPRI ES-1 RE-3 testing requirements
  • Available in 29 Kynar® colors

Arched Coping

  • Provides a smooth finish that is an aesthetically pleasing alternative to traditional piecing
  • Pre-notched lap joints provide proper water shed
  • Available in 5' through 10' lengths depending on building’s arch specifications
  • Available in 29 Kynar® colors

reglets AND COUNTERFlashing
  • Provides extended watertight protection along wall termination
  • Shields fasteners from elements, preventing oxidation
  • Custom-fabricated to specific projects
  • Available in 10' lengths
 

1-Piece
 

2-Piece

SURFACE MOUNTED COUNTER FLASHING

edge extENDER

Edge Extender

  • Used to extend perimeter edge widths
  • Can be used with all edge details including gutter and coping
  • Available in 10’ lengths; 3” through 8” widths
  • Available in 29 Kynar® colors

scupper

Scupper

  • Offer watertight through-wall drainage
  • Assembled with 24-gauge PVC coated metal with a 6" skirt
  • Available in white PVC coated metal only


Conductor head

  • Conductor complement the roof design and direct rainwater into downspouts
  • Available in 29 Kynar® colors

Gutters and accessories

DX STYLE

  • Available in three different sizes
  • Gutters can be customized to meet specifications
  • Inside and outside miters can be fabricated to any angle
  • Internal splice plates reduce installation time
  • Available in 29 Kynar® colors
  • EPDM, TPO and PVC roofing systems
 

EX Style

  • Available in three different sizes
  • Gutters can be customized to meet specifications
  • Inside and outside miters can be fabricated to any angle
  • Internal splice plates reduce installation time
  • Available in 29 Kynar® colors
  • EPDM, TPO and PVC roofing systems

LX Style

  • Available in three different sizes
  • Gutters can be customized to meet specifications
  • Inside and outside miters can be fabricated to any angle
  • Internal splice plates reduce installation time
  • Available in 29 Kynar® colors
  • EPDM, TPO and PVC roofing systems

mX Style

  • Available in three different sizes
  • Gutters can be customized to meet specifications
  • Inside and outside miters can be fabricated to any angle
  • Internal splice plates reduce installation time
  • Available in 29 Kynar® colors
  • EPDM, TPO and PVC roofing systems
 

downspouts and accessories

Closed downspout

  • Feature Pittsburgh seams
  • Available in 29 Kynar® colors
 

Open-face downspout

  • Eliminate debris and ice blockage
  • Available in 29 Kynar® colors



Drop/Outlet

  • Securely attaches gutters to downspouts
  • Can be custom ordered to meet gutter dimensions



PHOTO COMING SOON

SQUARE TO ROUND DRAIN ADAPTOR

  • Transitions square downspouts to ground drains or downspouts
 

Elbows

  • Available in 45° and 80° angles
  • A-Style directs water away from building
  • B-Style directs water alongside the building
 



Pitch PAN

Pitch Pan

  • Prefabricated pitch pans deliver a watertight seal around rooftop protrusions
  • Available in custom height, length and width
  • PVC coated available in white with 6" attached skirt
  • Available in 29 Kynar® colors for EPDM systems without skirt

warranty program


Mule-Hide offers an extensive warranty program with several options for commercial projects, including Membrane Warranties, Standard System Warranties and Premium System Warranties.

A Mule-Hide representative inspects all commercial projects for which a Standard System Warranty or a Premium System Warranty is requested prior to the issuance of the warranty. To be eligible for a System Warranty (either Standard or Premium), the installing contractor must be a Mule-Hide Warranty Eligible contractor. 
Mule-Hide also offers a selection of Membrane Warranties that are available for residential (single family dwelling) projects.